Welcome! Please Login or Sign Up.

Gemini xga-5000 power wire fuse keeps blowing out

Discussion in 'DJing, Mixing and Production Discussions' started by Lucky's Playhouse, Nov 7, 2020.


Tags:
  1. Lucky's Playhouse
    Lucky's Playhouse

    Newbie

    Joined:
    Oct 15, 2020
    Posts:
    3
    Likes:
    0
    Trophy Points:
    1
    So my Gemini XGA-5000 amp power wire fuse keep blowing out when powered on? I've changed fuse and soon as I powered on, fuse blows. I don't no anything about electrical or fuses. Has anyone else had this same issue?
     
    Lucky's Playhouse, Nov 7, 2020


    #1
  2. madskunt
    madskunt

    Member

    Joined:
    Apr 17, 2009
    Posts:
    31
    Likes:
    16
    Trophy Points:
    6
    Taken from owners manual:

    Fuse blows immediately--->Cause--->Speaker load impedance is too low OR type or rating of fuse is not correct

    Solution--->Check for shorts on the outputs, Check speaker impedance, Check that the fuse type is the correct rating.


    Since it happened randomly and was working previously, I would probably rule out the speaker impedance. The fuse you replaced it with, was it the same rating? Could be the shorts on the outputs. Maybe disconnect the outputs and add a new fuse and see if that works.
     
    madskunt, Nov 7, 2020


    #2

Share This Page